7DF403 Defoamer (SC)

Silicone based Fast foam suppression Operates in a wide pH & temperature range Ready to use or further dilutable for small applications Not for food contact applications

ScaleSolv-HV Vertical Surface Descaler (SC)

Clings to vertical surfaces (due to foam and viscosity) increasing the contact time Safe to use on Galvanized steel Safe to use on Copper and its alloys Does not produce chemical plating of copper over steel Safe to use on Aluminum Cleans between pH 2.8...

ScaleSolv Non-Hazardous DeScaler (SC)

Safe to use on Galvanized steel Safe to use on Copper and its alloys Does not produce chemical plating of copper over steel Safe to use on Aluminum Safe on Stainless steel (it does not contain chloride) Cleans between pH 2.8 and 3.8

ResinCare LF (SC)

Fast mixing in water and brine Can be fed into the brine tank before regeneration Extends service life by reducing the frequency of regeneration Use for commercial, industrial and household applications Aids in prolonging resin life Unlike citric acid...

CorroShield (SC)

It can be used to inhibit organic and inorganic acids It inhibits hydrochloric acid action on Galvanized steel (reduction) It prevents chemical plating of copper over steel by chelating the free copper ions resulting from the cleaning It has very high...

ScaleSolv II Non-Hazardous DeScaler (SC)

Odorless Safe to use on Copper and its alloys Does not produce chemical plating of copper over steel Safe to use on Aluminum Safe on Stainless steel (it does not contain chloride) Cleans between pH 2.8 and 3.9

IronSolv Ultra (SC)

It removes iron oxides while being mild to base metal It can be used on multi metal systems e.g. steel, copper, brass, galvanized steel, aluminum The main technical advance is the use of ammonium citrate while preventing the attack of ammonium or...

IronSolv Restore (SC)

Quickly converts ferric iron into ferrous soluble iron which is easy to rinse out Phosphatizes red iron oxide into black iron oxide when preparing surfaces for painting Can be used by spray and rinse application for removal of red iron stains from...

IronSolv Plus (SC)

It removes iron oxides while being mild to base metal It can be used on multi metal systems e.g. steel, copper, brass, galvanized steel, aluminum The main technical advance is the use of ammonium citrate while preventing the attack of ammonium or...

Resin Cleaner, 45# pail (SC)

Fast dissolution in water and brine Can be fed into the brine tank before regeneration Extends service life by reducing the frequency of regeneration Use for commercial, industrial and household applications Aids in prolonging resin life Unlike citric...

UltraBuffer, 45# pail (SC)

Concentrated powder which quickly dissolves with the help of gas evolution Biodegradable Brings low pH up and high pH down to acceptable disposal range Prevents pH overshooting during neutralization after acid cleaning of systems

FreezeGard Anti-Freeze & Deicer (SC)

Protects against freezing down to -70?C Non corrosive to metal Biodegradable Fast deicer Re-use when drained from the systems for several years (until water dilution brings the concentration too low to protect from freezing at the required temperature)

HydroShield XP (SC)

Protects against corrosion: Iron, Steel, Copper, Brass and Aluminum Does not promote microbial growth unlike Nitrite-based blends Non-foaming Hard water stability Protects carbon steel in low conductivity water (even deionized)

Hydroshield SP, Powder, 45lb. (SC)

Minimize corrosion of multi-metals in hydronic systems Does not support microbiological growth Fast dissolving. It does not need mixing Save money in transportation - concentrated Easy to test for. Helps maintain correct dosage

HydroShield LT (SC)

Blend of corrosion inhibitors to protect iron, steel, copper and aluminum during long-term and short-term hydro-testing operations, and Lay up of Hydronic systems Non-DOT regulated Non-Corrosive Biodegradable